Althon Swale Inlet Headwall-225
The Althon 225mm Swale Inlet Headwall is a swale and pond fibre reinforced precast concrete open inlet allowing surface water runoff to enter SUDS features, or to act as an outlet or overflow. This swale inlet is designed for pipework up to and including 225mm.
The profile of the inlet 1:3 (18 Degrees) is the same as the surrounding ground in accordance with guidelines for the construction and adoption of swales and ponds. There is a recess formed in either side to key the unit into the slope of the swale or pond and prevent it slipping.
Our 225mm swale inlet connects to pipework with a 225mm twinwall stub cast into the unit. The unit is fitted with a hinged 25mm grille which is available in mild steel galvanised after manufacture as standard or stainless steel to order. The grilles are fixed to the inlet with 4 No anti-tamper bolts, when the bottom two bolts are removed the grating hinges for ease of maintenance. The grating is located in an 8mm deep recess in the face of the unit to protect it from damage during routine maintenance of the surrounding area.
The 225mm Swale Inlet can be factory fitted with a 225mm inline non – return valve such as a Wastop if required
We can offer coloured headwalls in 4 colours but the final shade is affected by many influences.
Brochures, Datasheets and Installation Instructions for Althon Swale Inlet Headwall-225
Free headwall design service
If you cannot find what you are looking for our Free Headwall Design Service can help.