CH28C G Culvert Headwall
This is a sectional structure with rebated joint, assembled on site around the box culvert and locked together by means of stainless steel cast-in sockets and brackets provided. The Althon Culvert Headwall CH28C G will accommodate culverts with a maximum internal dimension of 2400mm wide x 800mm high. Available with a standard backwall height of; 1.25m, with lifting points cast in to each wingwall for safe handling using Althon lifting clutches. Stainless steel sockets are provided for the attachment of gratings and special brackets are available for use with the anchorage system.
Althon Culvert Headwalls offer a cost effective alternative to in-situ structures for connecting pipework discharging into open water courses.
All drainage pipes discharging into open watercourses, such as swales, ditches, ponds and rivers, should be fitted with an appropriate Althon headwall.
We can offer coloured headwalls in 4 colours but the final shade is affected by many influences.
Natural
Cotswold
Agate
Raven Grey
Everglade
Brochures, Datasheets and Installation Instructions for CH28C G Culvert Headwall
Free headwall design service
If you cannot find what you are looking for our Free Headwall Design Service can help.
Related Products
Culvert Headwalls
Althon Precast Box Culvert Outfalls are sectional in structure with rebated joints. This allows assembly on site around the box culvert
CH28C Culvert Headwall Range
- Up to 2400 x 1500mm Culvert Openings
- Standard, Horizontal or Chamfered Wingwalls
Culvert Header Beams and Wingwalls
Althon provide Header Beams and Wing Walls for Box Culverts. These units are designed for each specific situation.